Decreased moment of inertia of the lower limb facilitates a rapid hip internal rotation in a simulated foot impact maneuver. A laboratory-controlled biomechanical study for a precursor mechanism of noncontact anterior cruciate ligament injury.

BACKGROUND: Anterior cruciate ligament injury frequently occurs in the deceleration with the knee-extended position. In addition, a rapid hip internal rotation is concomitantly observed. However, how the extended knee position induces the hip internal rotation is unclear. METHODS: Sixteen healthy participants performed the simulated foot impact task on the experimental chair. To vary the knee flexion angle, the following four-foot placement positions relative to the pelvis segment, i.e.: 1) near; 2) middle; 3) far; and 4) far + heel strike, were tested. The reflective marker positions and the ground reaction force (GRF) data were collected. The moment of inertia of the entire lower limb around its long axis as well as the peak hip internal rotation angular velocity were calculated and compared among four conditions (Wilcoxon Signed-Rank Test with Bonferroni correction, P<0.0083). RESULTS: As the knee extended from the near to far + heel strike condition, the moment of inertia of the entire lower limb significantly decreased and hip internal rotation angular velocity significantly increased (P<0.001). CONCLUSIONS: The extended knee position with far foot placement from torso reduces the inertial resistance of the entire lower limb around its long axis and is vulnerable to the hip internal rotation.

Tibial morphology of symptomatic osteoarthritic knees varies according to location: a retrospective observational study in Japanese patients.

This study analyzed 31 patients with symptomatic osteoarthritic knees scheduled to undergo knee arthroplasty or high tibial osteotomy and demonstrated shape variations in their proximal tibia using an average three-dimensional (3D) bone model. Preoperative computed tomography of the affected knees was reconstructed as 3D bone models using a triangle mesh of surface layers. The initial case was defined as the template, and the other models were reconstructed into homologous models with the same number of mesh vertices as that in the template. The corresponding mesh vertices of the other models were averaged to evaluate the spatial position on the particular mesh vertex of the template. This was applied to all the mesh vertices of the template to generate the average 3D model. To quantify the variation in surface geometry, average minimum distance from the average bone model to 31 models was recorded. The medial proximal tibial cortex (1.63 mm) revealed lesser variation compared to the tibial tuberosity (2.50 mm) and lateral cortex (2.38 mm), (p = 0.004 and p = 0.020, respectively). The medial tibial plateau (1.46 mm) revealed larger variation compared to the lateral tibial plateau (1.16 mm) (p = 0.044). Understanding 3D geometry could help in development of implants for arthroplasty and knee osteotomy.

Absorption function loss due to the history of previous ankle sprain explored by unsupervised machine learning.

BACKGROUND: Ankle sprains are common and cause persistent ankle function reduction. To biomechanically evaluate the ankle function after ankle sprains, the ground reaction force (GRF) measurement during the single-legged landing had been used. However, previous studies focused on discrete features of vertical GRF (vGRF), which largely ignored vGRF waveform features that could better identify the ankle function. PURPOSE: To identify how the history of ankle sprain affect the vGRF waveform during the single-legged landing with unsupervised machine learning considering the time-series information of vGRF. METHODS: Eighty-seven currently healthy basketball athletes (12 athletes without ankle sprain, 49 athletes with bilateral, and 26 athletes with unilateral ankle sprain more than 6 months before the test day) performed single-legged landings from a 20 centimeters (cm) high box onto the force platform. Totally 518 trials vGRF data were collected from 87 athletes of 174 ankles, including 259 ankle sprain trials (from previous sprain ankles) and 259 non-ankle sprain trials (from without sprain ankles). The first 100 milliseconds (ms) vGRF waveforms after landing were extracted. Principal component analysis (PCA) was applied to the vGRF data, selecting 8 principal components (PCs) representing 96% of the information. Based on these 8 PCs, k-means method (k = 3) clustered the 518 trials into three clusters. Chi-square test assessed significant differences (p < 0.01) in the distribution of ankle sprain and non-ankle sprain trials among clusters. FINDINGS: The ankle sprain trials accounted for a significantly larger percentage (63.9%) in Cluster 3, which exhibited rapidly increased impulse vGRF waveforms with larger peaks in a short time. SIGNIFICANCE: PCA and k-means method for vGRF waveforms during single-legged landing identified that the history of previous ankle sprains caused a loss of ankle absorption ability lasting at least 6 months from an ankle sprain.

Characteristics of physical activity during beginner-level group tennis lessons and the effect daily activity.

Tennis is a popular leisure sport, and studies have indicated that playing tennis regularly provides many health benefits. We aimed to clarify the characteristics of physical activity during beginner-level group tennis lessons and daily physical activity of the participants. Physical activity was measured using an accelerometer sensor device for four weeks, including the 80-min duration tennis lessons held twice a week. Valid data were categorized for tennis and non-tennis days. The mean physical activity intensity during the tennis lesson was 3.37 METs. The mean ratio of short-bout rest periods to the tennis lesson time in 90 and 120 s was 7% and 4%, respectively. The mean physical activity intensity was significantly higher (p < 0.0001) and the duration of vigorous-intensity physical activity (VPA) was increased in 76% of participants on days with tennis lessons compared to without tennis lessons. Beginner-level tennis lesson has characteristics of less short-bout rest physical activity than previously reported competitive tennis match and increased the duration of VPA in daily activity compared to without tennis lessons, suggesting that beginner-level tennis lessons contribute physical activity of health benefits.

The deterministic condition for the ground reaction force acting point on the combined knee valgus and tibial internal rotation moments in early phase of cutting maneuvers in female athletes.

BACKGROUND: Combined knee valgus and tibial internal rotation (VL + IR) moments have been shown to stress the anterior cruciate ligament (ACL) in several in vitro cadaveric studies. To utilize this knowledge for non-contact ACL injury prevention in sports, it is necessary to elucidate how the ground reaction force (GRF) acting point (center of pressure (CoP)) in the stance foot produces combined knee VL + IR moments in risky maneuvers, such as cuttings. However, the effects of the GRF acting point on the development of the combined knee VL + IR moment in cutting are still unknown. METHODS: We first established the deterministic mechanical condition that the CoP position relative to the tibial rotational axis differentiates the GRF vector's directional probability for developing the combined knee VL + IR moment, and theoretically predicted that when the CoP is posterior to the tibial rotational axis, the GRF vector is more likely to produce the combined knee VL + IR moment than when the CoP is anterior to the tibial rotational axis. Then, we tested a stochastic aspect of our theory in a lab-controlled in vivo experiment. Fourteen females performed 60° cutting under forefoot/rearfoot strike conditions (10 trials each). The positions of lower limb markers and GRF data were measured, and the knee moment due to GRF vector was calculated. The trials were divided into anterior- and posterior-CoP groups depending on the CoP position relative to the tibial rotational axis at each 10 ms interval from 0 to 100 ms after foot strike, and the occurrence rate of the combined knee VL + IR moment was compared between trial groups. RESULTS: The posterior-CoP group showed significantly higher occurrence rates of the combined knee VL + IR moment (maximum of 82.8%) at every time point than those of the anterior-CoP trials, as theoretically predicted by the deterministic mechanical condition. CONCLUSION: The rearfoot strikes inducing the posterior CoP should be avoided to reduce the risk of non-contact ACL injury associated with the combined knee VL + IR stress.

Comparison of finite helical axis of the knee joint before and after bi-cruciate-preserving knee arthroplasty.

BACKGROUND: Difference in the finite helical axis of the knee joints before and after anterior cruciate ligament-preserving knee arthroplasties such as unicompartmental knee arthroplasty and bi-cruciate-retaining total knee arthroplasty remains unknown. This study compared the knee finite helical axes before and after bi-cruciate-preserving knee arthroplasty. METHODS: Patients undergoing medial unicompartmental knee arthroplasty and bi-cruciate-retaining total knee arthroplasty were included. Under fluoroscopy, participants performed a deep knee bend before and after surgery. A two/three-dimensional registration technique was employed to measure tibiofemoral kinematics. Femoral finite helical axis was calculated in a flexion range of 0-120° using 30° windows (early-, mid-, late-, and deep-flexion phases). FINDINGS: In unicompartmental knee arthroplasty, the preoperative knee vertical angle was larger than the postoperative vertical angle in mid- and deep-flexion phases. The postoperative knee vertical angle was smaller in unicompartmental knee arthroplasty than in bi-cruciate-retaining total knee arthroplasty. In unicompartmental knee arthroplasty, the preoperative horizontal angle was smaller than the postoperative horizontal angle in the early-flexion phase. However, in bi-cruciate-retaining total knee arthroplasty, the preoperative horizontal angle was larger than the postoperative horizontal angle in mid- and deep-flexion phases. The horizontal angle was smaller before unicompartmental knee arthroplasty than that before bi-cruciate-retaining total knee arthroplasty in early-, mid-, and deep-flexion phases. However, the vertical angle was larger after unicompartmental knee arthroplasty than that after bi-cruciate-retaining total knee arthroplasty in the early-flexion phase. INTERPRETATION: The knee finite helical axes before and after unicompartmental knee arthroplasty differed from those before and after bi-cruciate-retaining total knee arthroplasty.

Individual Variation in Adaptive Ability of the Anticipated Postural Stability During a Dual-Task Single-Leg Landing in Female Athletes.

Background: Precise postural control helps prevent anterior cruciate ligament injury. However, it is unknown whether the anticipated postural stability can be improved during a physically uncertain and cognitively demanding task. Hypothesis: Anticipated postural stability will improve through unanticipated single-leg landing with a rapid foot placement target tracking. Study Design: Controlled laboratory study. Methods: A total of 22 healthy female university-level athletes performed a novel dual-task paradigm: an unanticipated single-leg landing with foot placement target tracking. In the normal condition (60 trials), the participants jumped from a 20 cm-high box onto the landing target with their dominant leg as softly as possible. In the subsequent perturbation condition (PC) (60 trials), the initially assigned landing target was abruptly switched randomly, requiring participants to modify their preplanned foot placement position to the newly assigned position. The center-of-pressure trajectory length within the first 100 ms after foot impact (CoP100) was calculated as a measure of anticipated postural stability for each trial. In addition, the peak vertical ground-reaction force (FzPeak) was quantified to assess landing load, and the degree of postural adaptation during PC was quantified by fitting an exponential function to trial-by-trial changes in CoP100. Participants were divided into 2 groups according to increase or decrease in CoP100, and results were compared between the groups. Results: The direction and magnitude of postural sway alterations of the 22 participants showed a spectrum-like variation during the repeated trials. Twelve participants (sway-decreased group) exhibited a gradual reduction in postural sway (CoP100) during the PC, while the remaining 10 participants (sway-increased group) showed a gradual increase in CoP100. The FzPeak during the PC was significantly less in the sway-decreased group compared with the sway-increased group (P < .05). Conclusion: Variation in the direction and magnitude of postural sway alteration among participants suggested that there was individual variation in an athlete's adaptive ability of the anticipated postural stability. Clinical Relevance: The novel dual-task paradigm described in this study may be useful for rating individual injury risk based on an athlete's postural adaptation ability and may aid in targeted prevention strategies.

Gaussian mixture modeling of acceleration-derived signal for monitoring external physical load of tennis player.

Introduction: With the widespread use of wearable sensors, various methods to evaluate external physical loads using acceleration signals measured by inertial sensors in sporting activities have been proposed. Acceleration-derived external physical loads have been evaluated as a simple indicator, such as the mean or cumulative values of the target interval. However, such a conventional simplified indicator may not adequately represent the features of the external physical load in sporting activities involving various movement intensities. Therefore, we propose a method to evaluate the external physical load of tennis player based on the histogram of acceleration-derived signal obtained from wearable inertial sensors. Methods: Twenty-eight matches of 14 male collegiate players and 55 matches of 55 male middle-aged players wore sportswear-type wearable sensors during official tennis matches. The norm of the three-dimensional acceleration signal measured using the wearable sensor was smoothed, and the rest period (less than 0.3 G of at least 5 s) was excluded. Because the histogram of the processed acceleration signal showed a bimodal distribution, for example, high- and low-intensity peaks, a Gaussian mixture model was fitted to the histogram, and the model parameters were obtained to characterize the bimodal distribution of the acceleration signal for each player. Results: Among the obtained Gaussian mixture model parameters, the linear discrimination analysis revealed that the mean and standard deviation of the high-intensity side acceleration value accurately classified collegiate and middle-aged players with 93% accuracy; however, the conventional method (only the overall mean) showed less accurate classification results (63%). Conclusion: The mean and standard deviation of the high-intensity side extracted by the Gaussian mixture modeling is found to be the effective parameter representing the external physical load of tennis players. The histogram-based feature extraction of the acceleration-derived signal that exhibit multimodal distribution may provide a novel insight into monitoring external physical load in other sporting activities.

Bicruciate-retaining total knee arthroplasty procedure reduced tensile force in the middle and posterior components of lateral collateral ligament during deep knee flexion activities with no effect on tensile force of the medial collateral ligament.

PURPOSE: To analyse the effects of bicruciate-retaining total knee arthroplasty (BCR-TKA) on the tensile force of the collateral ligaments during two deep knee flexion activities, cross-leg sitting and squatting. METHODS: Thirteen patients (15 knees) treated using bicruciate-retaining total knee arthroplasty (BCR-TKA) for knee joint osteoarthritis were analysed. Knee joint kinematics during cross-leg sitting (open-chain flexion) and squatting (closed-chain flexion) were evaluated through fluoroscopy. The tensile force was calculated in vivo based on the change in the distance between the femoral and tibial attachment areas for the anterior, middle, and posterior components of the superficial (sMCL) and deep (dMCL) medial collateral ligament and the lateral collateral ligament (LCL). Differences in the calculated tensile forces of the collateral ligaments were evaluated using repeated measures of analysis of variance, with post hoc pairwise comparison (Bonferroni test). Statistical significance was set at P ≤ 0.05. RESULTS: The correction of the coronal alignment was related to the surgical technique, not to the implant design. No significant change in the tensile force in all three components of the sMCL from pre- to post-TKA (n.s.) was observed. For dMCL, a pre- to post-TKA change in the tensile force was observed only for the anterior dMCL component (p = 0.03). No change was observed in the tensile force of the anterior LCL with increasing flexion, with no difference in pre- to post-TKA and between activities (n.s.). In contrast, tensile force in the middle LCL slightly decreased with increasing flexion during squatting, pre- and post-TKA. After surgery, lower forces were generated at 40° of flexion (p = 0.04). Tensile force in the posterior LCL was higher in extension than flexion, which remained high in the extension post-TKA. However, after surgery, lower tensile forces were generated at 10° (p = 0.04) and 40° (p = 0.04) of flexion. CONCLUSIONS: The in vivo change in tensile forces of the collateral ligaments of the knee before and after BCR-TKA can inform the development of appropriate ligament balancing strategies to facilitate recovery of deep knee flexion activities after TKA, as well as for continued improvement of BCR-TKA designs. LEVEL OF EVIDENCE: III.

Mechanistic insights into glenohumeral kinematics derived from positional relationship between the contact path and humeral tuberosity.

Although three-dimensional (3D) glenohumeral (GH) motion has generally been expressed only by rotational elements, its mechanistic details, including GH rotations, remain unknown owing to a lack of geometric investigations. This study aims to investigate the positional relationship between the contact path and humeral tuberosities at the GH joint during arm elevation and to consider the mechanism of GH kinematics. Shoulder kinematics were captured using two-dimensional and 3D single-plane image registration techniques in 15 young healthy subjects during flexion, scaption, and abduction. The glenoid movement relative to the humeral head was calculated to describe the contact path on the humeral head. From the start to 45° of flexion, scaption, and abduction, the glenoid center moved from the anteromedial to the anterior, central, and posterior portions of the humeral head, respectively, as the GH joint rotated externally. From 45° to the maximal elevation for all elevation planes, the glenoid center moved upward to the humeral head and came close to the bicipital groove (BG) at maximal elevation, while the glenoid maintained a constant inclination at 20°-40° relative to the humerus. To investigate this mechanism, the position of humeral tuberosities relative to the glenoid was calculated, and the BG was found to face the supraglenoid tubercle, the attachment site of the long head of biceps (LHB). GH external rotation mainly occurred depending on the elevation planes in the early phase of elevation, and it might be kept constant by the LHB and rotator cuff in the mid- to end range of elevation.

The influence of three-dimensional scapular kinematics on arm elevation angle in healthy subjects.

BACKGROUND: We often clinically observe individual differences in arm elevation angles, but the motion producing these differences remains unclear, partly because of the difficulty of accurately measuring scapular motion. The aim of this study was to determine whether the scapular or glenohumeral (GH) motion has more influence on differences in the arm elevation angles by capturing not only the humerus and scapula but also the trunk using two- (2D) and three-dimensional (3D) shape-matching registration techniques. METHODS: Fifteen healthy subjects (13 male and 2 female; mean age: 27.7 years) were instructed to elevate their arms in the sagittal, scapular, and coronal planes. They were divided into high and low groups based on the average of arm elevation angle measured by a goniometer. The 3D scapular, thoracohumeral, and glenohumeral motions were evaluated using 2D/3D single-plane registration. To compare 3D motions between groups, we performed a two-way repeated measures analysis of variance. RESULTS: Eight subjects were assigned to the high group, while seven subjects were assigned to the low groups based on an average elevation angle of 172°. The low group demonstrated a significant larger scapular protraction during elevation in all planes (P = 0.0002 for flexion; P = 0.0047 for scaption; P = 0.0314 for abduction), and smaller posterior tilting only during flexion (P = 0.0157). No significant differences occurred in scapular upward rotations or the glenohumeral positions and rotations. CONCLUSIONS: This study revealed that insufficient scapular retraction and posterior tilting results in lower arm elevation angles, suggesting that improving the flexibility and activation of muscles surrounding the scapula may be important to achieve complete arm elevation.

A preoperative simulation of medial open-wedge high tibial osteotomy for predicting postoperative realignment.

Three-dimensional preoperative surgical simulation of the medial open-wedge high tibial osteotomy (OWHTO), simplified as the rigid rotation around the hinge axis, has been performed to predict postoperative realignment. However, the practicality of this highly simplified simulation method has not been verified. This study aimed to investigate the validity of realignment simulation simplified as a rotation around a hinge axis compared with a postoperative CT model. A three-dimensional surface model of the tibia and femur was created from preoperative computed tomography (CT) images (preoperative model) of three patients. The simulation of medial OWHTO created sixty computer simulation models in each patient simplified as the rigid rotation of the proximal part of the tibia relative to the distal part from 1° to 20° around three types of hinge axes. The simulation models were compared with the actual postoperative model created from postoperative CT images to assess the reality of the simulation model. The average surface distance between the two models was calculated as an index representing the similarity of the simulation model to the postoperative model. The minimum value of average surface distances between the simulation and postoperative CT models was almost 1 mm in each patient. The rotation angles at which the minimum value of average surface distances was represented were almost identical to the actual correction angles. We found that the posterior tibial tilt and the axial rotation of the proximal tibia of the simulation model well represented those of the postoperative CT model, as well as the valgus correction. Therefore, the realignment simulation of medial OWHTO can generate realistic candidates for postoperative realignment that includes the actual postoperative realignment, suggesting the efficacy of the preoperative simulation method.

The counteracting effect of the friction moment against the tibial rotational moment driven by the ground reaction force in an early stance phase of cutting maneuver among healthy male athletes.

The ground reaction force (GRF) is known to produce tibial internal rotation loading associated with the stress in the anterior cruciate ligament (ACL). However, it is unclear whether the friction moment (FM; the moment due to horizontal shoe-floor friction, acting around the vertical axis at the GRF acting point) facilitates or restrains the effect of GRF-driven tibial rotation loading during cutting. The 45° cutting motions with forefoot/rearfoot strikes were captured simultaneously with GRF and FM data from 23 healthy males. The FM- and GRF-driven tibial rotation moments were calculated. Time-series correlation between FM- and GRF-driven tibial rotation moments and the orientation relationship among those moment vectors was investigated. The FM-driven tibial rotation moment negatively correlated with the GRF-driven one within the first 10% of stance phase. The peak regression slope value was -0.34 [SD 0.33] for forefoot and -1.64 [SD 1.76] for rearfoot strikes, showing significant difference from zero (SPM one-sample t-test, p<0.05). The FM-driven tibial "external" rotation moment counteracted the GRF-driven tibial "internal" rotation moment within first 10% of the stance phase in most trials, suggesting that the FM-driven tibial rotation moment potentially diminishes the effect of GRF-driven one and may reduce ACL injury risk during cutting.

Validity of Freehand 3-D Ultrasound System in Measurement of the 3-D Surface Shape of Shoulder Muscles.

Freehand 3-D ultrasound (3DUS) system is a promising technique for accurately assessing muscle morphology. However, its accuracy has been validated mainly in terms of volume by examining lower limb muscles. This study was aimed at validating 3DUS in the measurements of 3-D surface shape and volume by comparing them with magnetic resonance imaging (MRI) measurements while ensuring the reproducibility of participant posture by focusing on the shoulder muscles. The supraspinatus, infraspinatus and posterior deltoid muscles of 10 healthy men were scanned using 3DUS and MRI while secured by an immobilization support customized for each participant. A 3-D surface model of each muscle was created from the 3DUS and MRI methods, and the agreement between them was assessed. For the muscle volume, the mean difference between the two models was within -0.51 cm3. For the 3-D surface shape, the distances between the closest points of the two models and the Dice similarity coefficient were calculated. The results indicated that the median surface distance was less than 1.12 mm and the Dice similarity coefficient was larger than 0.85. These results suggest that, given the aforementioned error is permitted, 3DUS can be used as an alternative to MRI in measuring volume and surface shape, even for the shoulder muscles.

An Experimental Feasibility Study Evaluating the Adequacy of a Sportswear-Type Wearable for Recording Exercise Intensity.

Sportswear-type wearables with integrated inertial sensors and electrocardiogram (ECG) electrodes have been commercially developed. We evaluated the feasibility of using a sportswear-type wearable with integrated inertial sensors and electrocardiogram (ECG) electrodes for evaluating exercise intensity within a controlled laboratory setting. Six male college athletes were asked to wear a sportswear-type wearable while performing a treadmill test that reached up to 20 km/h. The magnitude of the filtered tri-axial acceleration signal, recorded by the inertial sensor, was used to calculate the acceleration index. The R-R intervals of the ECG were used to determine heart rate; the external validity of the heart rate was then evaluated according to oxygen uptake, which is the gold standard for physiological exercise intensity. Single regression analysis between treadmill speed and the acceleration index in each participant showed that the slope of the regression line was significantly greater than zero with a high coefficient of determination (walking, 0.95; jogging, 0.96; running, 0.90). Another single regression analysis between heart rate and oxygen uptake showed that the slope of the regression line was significantly greater than zero, with a high coefficient of determination (0.96). Together, these results indicate that the sportswear-type wearable evaluated in this study is a feasible technology for evaluating physical and physiological exercise intensity across a wide range of physical activities and sport performances.

In Vivo three-dimensional kinematics of normal knees during sitting sideways on the floor.

BACKGROUND: The normal knee kinematics during asymmetrical kneeling such as the sitting sideways remains unknown. This study aimed to clarify in vivo kinematics during sitting sideways of normal knees. METHODS: Twelve knees from six volunteers were examined. Under fluoroscopy, each volunteer performed a sitting sideways. A two-dimensional/three-dimensional registration technique was used. The rotation angle, varus-valgus angle, anteroposterior translation of the medial and lateral sides of the femur relative to the tibia, and kinematic pathway in each flexion angle was evaluated. RESULTS: Bilateral knees during sitting sideways showed a femoral external rotation relative to the tibia with flexion (ipsilateral: 13.7 ± 3.5°, contralateral: 5.8 ± 6.8°). Whereas the ipsilateral knees showed valgus movement of 4.6 ± 2.5° from 130° to 150° of flexion, and the contralateral knees showed varus movement of -3.1 ± 4.4° from 110° to 150° of flexion. The medial side of the contralateral knees was more posteriorly located than that of the ipsilateral knees beyond 110° of flexion. The lateral side of the contralateral knees was more anteriorly located than that of the ipsilateral knees from 120° to 150° of flexion. In the ipsilateral knees, a medial pivot pattern followed by a bicondylar rollback was observed. In the contralateral knees, no significant movement followed by a bicondylar rollback was observed. CONCLUSION: Even though the asymmetrical kneeling such as sitting sideways, the knees did not display asymmetrical movement.

Effect of the foot-strike pattern on the sagittal plane knee kinetics and kinematics during the early phase of cutting movements.

Anterior cruciate ligament (ACL) injury occurs soon after foot-strike. Cutting with a shallow flexed knee is considered a risk factor for ACL injury; however, how foot-strike patterns (forefoot strike [FFS] vs. rearfoot strike [RFS]) affect sagittal plane knee kinetics and kinematics after a foot-strike, is unknown. This study aimed to investigate the effect of foot-strike patterns on the sagittal plane knee kinetics and kinematics during cutting. Twenty-three males performed 45° cutting under RFS and FFS conditions. The marker position data on the lower limb, and the ground reaction force (GRF) data were collected and time-normalized (0-100%) during the stance phase. The knee flexion angle, shank and GRF vector inclination angle relative to the global vertical axis, knee flexion/extension moment, and anterior/posterior component of GRF relative to the shank segment were calculated and compared between foot-strike patterns using statistical parametric mapping paired t-test (p < 0.0071). The knee flexion angle was smaller in RFS than in FFS in the initial 40% of the stance phase. In the RFS condition, the GRF vector was directed anteriorly to the shank segment, and the knee extension moment was produced by GRF in 0-7% of the stance phase, while these results were not observed in the FFS condition. These results suggest that compared to FFS, RFS induces a shallow flexed knee with an anterior-directed GRF component in the early stance phase and might potentially provoke a risk of ACL injury.

Variability in Physical Inactivity Responses of University Students during COVID-19 Pandemic: A Monitoring of Daily Step Counts Using a Smartphone Application.

This study investigated the changes in physical inactivity of university students during the COVID-19 pandemic, with reference to their academic calendar. We used the daily step counts recorded by a smartphone application (iPhone Health App) from April 2020 to January 2021 (287 days) for 603 participants. The data for 287 days were divided into five periods based on their academic calendar. The median value of daily step counts across each period was calculated. A k-means clustering analysis was performed to classify the 603 participants into subgroups to demonstrate the variability in the physical inactivity responses. The median daily step counts, with a 7-day moving average, dramatically decreased from 5000 to 2000 steps/day in early April. It remained at a lower level (less than 2000 steps/day) during the first semester, then increased to more than 5000 steps/day at the start of summer vacation. The clustering analysis demonstrated the variability in physical inactivity responses. The inactive students did not recover daily step counts throughout the year. Consequently, promoting physical activity is recommended for inactive university students over the course of the whole semester.

Kinematics of bicruciate stabilized and cruciate retaining total knee arthroplasty.

Few studies have been reported about kinematic comparison between bicruciate stabilized and cruciate retaining total knee arthroplasty with the same anatomical surface geometry. The aim of this study was to demonstrate the in vivo kinematics and postoperative patient-reported outcomes of these two surgeries with the same anatomical surface geometry. We analyzed 17 bicruciate stabilized and 18 cruciate retaining total knee arthroplasties using single-plane fluoroscopic surveillance with two- to three-dimensional registration techniques during squatting from minimum to maximum flexion. Flexion angle, femoral external rotation, anteroposterior position of the medial and lateral sides, and postoperative 2011 Knee Society Scores were analyzed. Maximum flexion angles were larger for bicruciate stabilized than for cruciate retaining total knee arthroplasties. There was no significant difference in femoral external rotation between the two types. The medial and lateral femoral condyles in bicruciate stabilized type translated more posteriorly during deeper flexion and at maximum flexion angle, respectively, than those in cruciate retaining total knee arthroplasty. Both groups revealed medial pivots in early flexion, but during deep flexion, bicruciate stabilized total knee arthroplasty revealed bicondylar roll-back and cruciate retaining total knee arthroplasty revealed paradoxical anterior motion. Both groups exhibited similar results in postoperative 2011 Knee Society Scores. Bicruciate stabilized and cruciate retaining total knee arthroplasties with the same anatomical articular surfaces demonstrated different kinematics patterns during squatting. However, there were no significant differences in postoperative 2011 Knee Society Scores between the two types of surgery.

Validity of Spatio-Temporal Gait Parameters in Healthy Young Adults Using a Motion-Sensor-Based Gait Analysis System (ORPHE ANALYTICS) during Walking and Running.

Motion sensors are widely used for gait analysis. The validity of commercial gait analysis systems is of great interest because calculating position/angle-level gait parameters potentially produces an error in the integration process of the motion sensor data; moreover, the validity of ORPHE ANALYTICS, a motion-sensor-based gait analysis system, has not yet been examined. We examined the validity of the gait parameters calculated using ORPHE ANALYTICS relative to those calculated using conventional optical motion capture. Nine young adults performed gait tasks on a treadmill at speeds of 2−12 km/h. The three-dimensional position data and acceleration and angular velocity data of the feet were collected. The gait parameters were calculated from motion sensor data using ORPHE ANALYTICS, and optical motion capture data. Intraclass correlation coefficients [ICC(2,1)] were calculated for relative validities. Eight items, namely, stride duration, stride length, stride frequency, stride speed, vertical height, stance phase duration, swing phase duration, and sagittal angleIC exhibited excellent relative validities [ICC(2,1) > 0.9]. In contrast, sagittal angleTO and frontal angleIC demonstrated good [ICC(2,1) = 0.892−0.833] and moderate relative validity [ICC(2,1) = 0.566−0.627], respectively. ORPHE ANALYTICS was found to exhibit excellent relative validities for most gait parameters. These results suggest its feasibility for gait analysis outside the laboratory setting.